From 555e95319513c7c8289ffe9d188ca1899e5cf70d Mon Sep 17 00:00:00 2001 From: schneefux Date: Sat, 21 May 2016 21:41:35 +0200 Subject: migrate to hugo --- content/post/esp8266.md | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 content/post/esp8266.md (limited to 'content/post/esp8266.md') diff --git a/content/post/esp8266.md b/content/post/esp8266.md new file mode 100644 index 0000000..bacb235 --- /dev/null +++ b/content/post/esp8266.md @@ -0,0 +1,16 @@ +--- +categories: +- embedded +date: 2015-10-14 +title: Quick guide - Flashing an ESP8266 +--- + +Get an FTDI, the Arduino IDE, add the ESP8266 plugin to the IDE. + +Then connect TX↔RX, RX↔TX, GND↔GND, VCC↔3V and CHPD↔3V. + +To enter the flashing mode, connect GPIO0↔GND. Then briefly touch RST↔GND. + +After flashing, disconnect GPIO0 from GND. + +RX and TX can later be used as GPIOs. The blue led is on when TX is low. -- cgit v1.3.1