From bd8464abb8deee0d31bb84cc47cd3335c0e688d5 Mon Sep 17 00:00:00 2001 From: schneefux Date: Tue, 24 May 2016 19:46:37 +0200 Subject: move posts into 'tech' section --- content/tech/esp8266.md | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 content/tech/esp8266.md (limited to 'content/tech/esp8266.md') diff --git a/content/tech/esp8266.md b/content/tech/esp8266.md new file mode 100644 index 0000000..bacb235 --- /dev/null +++ b/content/tech/esp8266.md @@ -0,0 +1,16 @@ +--- +categories: +- embedded +date: 2015-10-14 +title: Quick guide - Flashing an ESP8266 +--- + +Get an FTDI, the Arduino IDE, add the ESP8266 plugin to the IDE. + +Then connect TX↔RX, RX↔TX, GND↔GND, VCC↔3V and CHPD↔3V. + +To enter the flashing mode, connect GPIO0↔GND. Then briefly touch RST↔GND. + +After flashing, disconnect GPIO0 from GND. + +RX and TX can later be used as GPIOs. The blue led is on when TX is low. -- cgit v1.3.1